Menzerna - SF 4000

Item number: MZ-PO106FA


32,95 €
32,95 € per 1 l

including 20% VAT., plus shipping

Short supply

There are variations of this item. Please select the variation you wish.


Menzerna Super Finish is the upgraded version of the the PO 106FF. It is currently used in Mercedes plants in Germany and in auto plants throughout the U.S. to create the reflective gloss on brand new scratch-resistant paint finishes.

At the end of 2003, Mercedes Benz put into production a new scratch-resistant clear coat lacquer made up of nano-sized ceramic particles, which are baked and hardened in the paintshop oven, just like you'd bake pottery in a kiln. This process results in an extensively cross-linked, very hard paint finish that stands up better to mechanical car washes and day to day abuse. This clear coat, called CeramiClear from PPG, is the only nanotechnology clear coat used on Mercedes production lines and is approved for the repair of Mercedes and Nissans.

The challenge with ceramic clear coat is that it is harder to correct than the comparatively soft clear coats used by most other car manufacturers. Ceramic paint can still scratch; just not as easily. When a scratch does occur, not all the polishes on the market are capable of leveling the new, hard-as-a-rock clear coats.

Super Finish was developed to tackle fine surface scratches in the Maybach and Rolls Royce Phantom and other cerami-coat finishes. It is however becoming widly adopted as the new standard in finishing polishes. PO106FA Super Finish will leave your paint with a mirror shine. Final Finish is capable of removing 2500 - 3000 grit sanding scratches, haze from compounding, light swirls, and mild oxidation while restoring a glassy, smooth shine.
  • For scratch-resistant clear coats
  • Removes 2500-3000 grit sand scratches
  • Water-based, non-silicone
  • Low-dusting, easy clean-up
  • Safe on all types of paint
  • Effective on newly cured OEM coatings and older finishes
  • Produces a mirror-like gloss
  • Use after Menzerna Super Intensive Polish on dark vehicles
Maschine Application:
  • Make sure the surface to be compounded is clean and dry. Fresh paint should be fully cured. Apply Super Intensive Polish out of direct sunlight
  • Use a wool or foam polishing pad, such as Lake Country's CCS Black Finishing Pad. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area
  • Polish at 1200-1800 RPM (5000-6000 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defect has been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing
  • Wipe the area with a damp microfiber cloth
  • Always apply a wax or sealant after compounding or polishing. We recommend M-Seal, jetSEAL109 or 50/50 Wax to seal in the shine
Cut:4.0 / 10.0
Gloss:10.0 / 10.0
Capacity:250ml / 1000ml

Contents:1,00 l

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Product Tags

Please login first to add a tag.

Other customers have also bought the following items
CarPro - CeriGlass Polish 500ml

CarPro - CeriGlass Polish 500ml

29,95 € *
59,90 € per 1 l
Short supply
Menzerna - PLUP Power Lock Ultimate Protection 1L
already ordered, expected on 05.07.2017